Steady Burning CREE LED Helipad Approach Light Aluminum Body FATO Lights

AH-HP-I-FATO(L) LED Heliport Final Approach and Take-off Area Lighting

The objective of a FATO lighting system for onshore surface-level heliports is to provide to the pilot operating at night an indication of the shape, location and extent of the FATO. FATO lights shall be placed along the edges of the FATO and be fixed omnidirectional lights showing white.

8inch International standard mounting for aerodrome inset light.

Compliance

ICAO Annex 14 Volume ǁ Heliports 5.3.7

CAAC MH 5001-2013 Aerodrome technical standards

CAAC MH 5013-2014 Technical Standards of Civil Heliports

Features

Electrical

Ultra high intensity CREE LED as light source saving power consumption and maintenance, 95% less power than equivalent incandescent light

Physical

Pressure resistance lens allowed the vehicles go through on light

Die-casting aluminum covered by color powder coasted which have good corrosion protection and load bearing.

Optional

Infrared LED for pilot using NVG (Night Vision Goggles)

Controller for power supplying and turn ON/OFF light

VHF pilot to ground remote control

Application

Surface-level heliport

Elevated heliport or helideck

Airport light
Heliport lighting
Airfield light
Helipad lights
Airport light
Led heliport inset light
FATO light

CREE LED Helipad Approach Light

Steady Burning Helipad Approach Light

Aluminum Body FATO Lights

Steady Burning CREE LED Helipad Approach Light Aluminum Body FATO Lights Images